Genuine-iMAX B6 LiPro RC Lipo / Li-ion / LiFePo4 / NiMH / NICD Battery Balance Charger
( Not including Power Supply )
Microprocessor controlled Delta-peak sensitivity.
Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
Large range of charge currents Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
Support new generation A123 system (LiFe) battery
Able to charge for LiFePo4 / NIMH / Lithium / Li-Po Rechargeable battery Packs
Operating voltage range: DC10.0~18.0 Volt
Circuit power: Max. Charge power 50W
Max. Discharge power: 5W
Charge current range: 0.1~5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-Po: 300mAh/cell
NiCd / NiMH battery cell count: 1~15cell
Li-ion / Polymer / LiFePo4 cell count: 1-6 series
PB battery voltage: 2V-20V
Net Weight: 277g
Gross Weight: 580g
Dimensions: 140 x 130 x 45mm
Multiple-celled battery pack, it is possible for the individual cells to develop differences in their charge levels. Since batteries are very sensitive to overcharging, it’s important that their cells be kept at or very near equal levels when charging.
A balance charger monitoring every individual cell voltages in a pack through a connector on the pack ( Balance connector ) and adjusting their rate of charge accordingly. It greatly extending battery life and avoid over-charge. It realizes the best compatibility for multiple-cell battery pack.
AC adapter or power supply is not included!
There are currently no product reviews.
Tips : Comments after the show audited
Customers who bought this product also purchased...